SABEU - Plastics and Membrane Technology

P: +49 5551 9101-00
E-Mail: info@sabeu.com

FLUXX® Degassing Inserts

SABEU develops and produces membranes used in our vents and vented closures. They offer crucial advantages for the packaging of gas emitting materials.

FLUXX® packaging vents are equipped with PTFE membranes, which allow for continuous pressure equalization, while preventing pressure build-up and suppression of containers. The patented FLUXX® drip-off edge allows fluids to drain immediately after coming into contact with the membrane, keeping the membrane unobstructed and permeable to air.

Properties:

  • allow the continuous pressure release
  • prevent the swelling, bursting or collapsing of containers
  • allow the quick re-ventilation after contact with fluids
  • provide a reliable protection against leaks
  • are easy to install
  • are suitable for a high number of applications

Intended for the packaging of:

  • Industrial chemicals
  • Bleaching agents
  • Peroxides
  • Fertilizers
  • Pool chemicals
  • Pesticides
  • Sterilizers
  • Disinfectants and cleaning agents
  • Foods (comply with EC and FDA regulations)

Based on their configuration and structural design, the FLUXX® packaging vents meet all the requirements for the approval with suitable containers set forth in the UN test specifications, ADR, and the BAM [German Federal Institute for Materials Research and Testing] dangerous goods regulation, BAM-GGR 005.

Degassing Inserts for closures

F15 F17 F38
Product F15 F17 F38
Diameter 15 mm 17 mm 38 mm
h1 7,5 mm 15,0 mm 22,0 mm
h2 6,0 mm 6,0 mm 12,0 +/- 0,2 mm
d 13,0 +/- 0,1 mm 13,0 +/- 0,1 mm 13,0 +/- 0,1 mm
Water entry pressure 0,69 bar 0,69 bar 0,69 bar
Typical airflow 5,0 l/h at 12 mbar 5,0 l/h at 12 mbar 70 l/h at 12 mbar
Typical applications 2-60 liters 2-60 liters 60-1.500 liters
Description Category Size Type
FLUXX Degassing Inserts Product information 913.41 kB pdf
FLUXX Degassing Inserts F38 LOCK SN Product information 853.87 kB pdf
FLUXX Degassing Inserts Instructions for Use Product information 732.54 kB pdf
FLUXX Product catalog Product information 4.49 MB pdf

back to overview

Related topics

FLUXX® Shaker Cans
Die FLUXX®-Shaker Cans are made of polypropylene (PP). The covering caps are available in different colors. The sprinkling inserts are available in two different variations. They are sealed with a tri ...
FLUXX® Tube Tips & Nozzles
FLUXX® nozzles and tube tips are made of PE-HD and are highly resistant to acids, bases, water, alcohols, oil and gasoline. Thanks to the non-polar and hydrophobic surface, our tube tips are particula ...
FLUXX® Vented Caps
FLUXX®-Vented Caps for standardized industrial containers are available in the following thread sizes: DIN 45 with molded on tamper-evidence ring DIN 51 with or without tamper-evidence ring / molded o ...
FLUXX® Sealing Caps
FLUXX®-Sealing Caps for induction heat sealing are available for bottles and containers with thread sizes: DIN 45 DIN 50 DIN 60 DIN 63 Based on their configuration and structural design, our seals mee ...